2X2 HDMI 2.0 Video Wall Processor (4K60 18Gbps, IR, Audio, Rotation)

The Avenview HDM2-PROWALL-T4K 4 port HDMI video wall processor with UHD 4K@60 4:4:4 support,  its one of the first videowall processor to accept an input of up to TRUE 4K@60 from a source device. Equipped with 4 four HDMI outputs processing the input signal pixel to pixel with a vivid, clear and crisp picture without resolution loss onto Full HD displays. This unit can be used as a dedicated  2×2 video wall at UHD 4K@60 or 1080p with rotation, different preset or custom layouts. Bonus feature this unit can support cascading through software to allow using multiple units to create a larger videowall 3×3 with stunning clarity using the same UHD 4K@60 input for displaying content on your flat panel displays or projectors. Bundled with its own control software the user can simply configure different layouts for any solution such as 1×1, 1×3, 1×4, 2×2  and mosaic. The HDM2-PROWALL-T4K can accept both DVI/HDMI source inputs/outputs, made with the embedded scaler that converts signals from either DVI/HDMI source to match the native resolution of monitors, flat panel displays, projectors connected to the 4 outputs connectors. Each output resolution can be selected for each display, also settings up to FULL HD 1080p and PC resolutions WUXGA (1920×1200). Recommended applications include retail digital signage, commercial applications and broadcasting/education/ surveillance systems etc.

Features

• Four DVI/HDMI outputs from 640×480 to 1920×1080, 1920×1200
• Supports HDMI/DVI input, from 640×480 to 1920×1080@60,UHD 4K@60 4:4:4, interlaced or progressive
• HDCP compliant (HDCP 2.2 input/HDCP 1.4 output
• Several image parameters and layouts can be saved in computers and can be loaded for later use
• Firmware upgradable for new features and technology enhancement
• Supports IR remote control
• Supports input rotation at 1080p resolution only
• Software control through USB and Ethernet
• Resize, position, zoom output video
• User-selectable output settings, up to 1920×1080,1920×1200
• Supports UHD 4K@60 input with layout only in 2×2 mode
• Supports Cascading through software multiple units 3×3 mode
• Each DVI/HDMI output has an independent controllable display area
• Supports remote control to switch 1×1, 2×2, 1×3 rotate, and 1×4 rotate mode
• Each output can support OSD control for edge correction
• Compact size

Technical Specifications

ITEM	DESCRIPTION
MODEL	HDM2-PROWALL-T4K
MODEL DESCRIPTION	4 Screen 4K Display Video Wall Processor
HDCP COMPLIANCE	Yes
VIDEO BANDWIDTH	Input – Single link 600MHz [18Gbps] Output – DVI [Single-link 4.95Gbps] / HDMI[2.25G to 6.75Gbps]
VIDEO SUPPORT	Input – 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)Output – 1920×1080@60 / 1920×1200@60
VIDEO FORMAT SUPPORT	HDMI/DVI
VIDEO LOOP-OUT	No
AUDIO SUPPORT	Yes only when using HDMI source device
ESD PROTECTION	Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
PCB STACK-UP	8-layer board [impedance control — differential 100Ω; single 50Ω]
INPUT	1x HDMI/DVI-D + 1x USB + 1xRJ45
OUTPUT	4x HDMI/DVI-D + 1x L/R RCA Stereo
CONTROL	IR remote control / Ethernet / USB (virtual com) / Front Panel
INPUT TMDS SIGNAL	1.2 Volts [peak-to-peak]
DVI CONNECTOR	DVI-D [29-pin female, digital only]
USB CONNECTOR	Type A
RJ 45 COPNNECTOR	WE/SS 8P8C
DIMENSIONS	11.3″ x 7″ x 1.7″
POWER SUPPLY	12V 5A
WEIGHT	3.3lbs
ENVIRONMENTAL
OPERATING TEMPERATURE	32° ~ 104°F (0° to 40°C)
STORAGE TEMPERATURE	-4° ~ 140°F (-20° ~ 60°C)
RELATIVE HUMIDITY	20~90% RH (no condensation)

Diagrams

Command Control

• Avenview HDM2-PROWALL-T4K Command Control

AutoCAD Drawings

• Avenview HDM2-PROWALL-T4K AutoCAD drawing

Software Downloads

• Avenview HDM2-PROWALL-T4K PC Software v2.7
• Avenview HDM2-PROWALL-T4K PC Software DVI Version