HDMI Extender up to 20 KM over Fiber Optic with IR Support

FO-HDM-IP4K-SET, HDMI extender set is designed to provide a long haul video signal transmission over fiber optic cable at furthest possible distances. Avenview’s FO-HDM-IP4K-SET delivers an amazing pixel to pixel transmission of 4K or 1080p HDMI signal up to 20 kilometers. With this extender users overcome the length restrictions of standard HDMI cables with IR Support.

Features

• The Sender and Receiver units can extend 20000 meters (20 km) over a Fiber Optic cord point to point;
• The Sender can be connected to a Gigabit switch to establish an Ip address therefore sending 1080p/4K video signals to multiple Receivers connected to the Gigabit switch and the HDMI displays. (network switch with fiber optic ports required);
• Multiple Senders can be connected to a Managed Gigabit switch with vlAN/IGMp support therefore sending 1080p/4K video signals to Receivers connected to the Gigabit switch to show different sources on multiple displays;*
• Extends HDMI signal up to 20 km over fiber optic;
• HDCP Compliant;
• Supported resolutions: 480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz, 1080i@50/60Hz,1080p@50/60Hz 4Kx2K@25/30Hz,4Kx2K@25/30Hz
• Supports point to point transmission function which can be expanded to the multi-point to point transmission function.
• Number of Senders and Receivers that can be used is dependent on bandwidth of the switch (Recommended Gigabit switch 10/1000).Built-in electromagnetic interference prevention in environment for long distance transmission.
• Low signal loss, wide frequency band and strong anti-interference features;
• High-end aluminum alloy enclosure design.
• Wall-mountable design for convenient installation.
• Support IR pass back for easy control.
• Single mode fiber optic transmission.
• *Requires a managed Gigabit switch with VLAN/IGMP support to have a soultion with multiple sources (Transmitters). Standard Gigabit switch can only support one transmitter.
• The managed switch must support port based IEEE 802.1Q VLAN, IGMP, and to allow duplicate IP addresses across the VLAN domains.
• Each VLAN acts as independent HDMI over IP Channel on the network.

Specifications

ITEM	DESCRIPTION
INPUT	FO-HDM-IP4K-S	FO-HDM-IP4K-R
OUTPUT	HDMI TRANSMITTER	HDMI RECEIVER
HDMI COMPLIANCE	Yes
HDCP COMPLIANCE	Yes
TMDS BANDWIDTH	10.2Gpbs
SUPPORTED RESOLUTION	480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz, 1080i@50/60Hz,1080p@50/60Hz 4Kx2K@25/30Hz,4Kx2K@25/30Hz
DDC SIGNAL VOLTAGE	5Vp-p(TTL)
AUDIO SUPPORT	Surround Sound (up to 7.1 Ch) or Stereo Digital Audio
IR PASS-THROUGH	Supportrs 20~60KHz IR devices
CENTRAL WAVELENGTH	1310nm
INPUT	1x HDMI	1x FO, 1x IR IN
OUTPUT	1x FO, 1x IR Out	1x HDMI
RETURN LOSS	15dB
RECEIVE SENSITIVITY	?-32dBm
OUTPUT LIGHT POWER	?-11dBm
LINK LOSS	?14dB
FIBER OPTIC CONNECTOR	SC Single Mode
HDMI CONNECTOR	Type A (19 pin female)
POWER SUPPLY	2 x DC 5v/2A
POWER CONSUMPTION	4W Max (each)
DIMENSION L X W X H	5.9” x 3.7” x0.9”
WEIGHT	0.8 lbs
ENVIRONMENTAL
OPERATING TEMPERATURE	32° ~ 104°F (0° to 40°C)
STORAGE TEMPERATURE	-4° ~ 140°F (-20° ~ 60°C)
RELATIVE HUMIDITY	20~90% RH (no condensation)

Diagram