Model: CTRLPRO-MIP-V4
$1,199.00
The CTRLPRO-MIP-V4 puts centralized command of your entire AV over IP infrastructure in one place. Simply connect it to the same local network as your transmitters and receivers to instantly gain unified control over channel routing, unicast and multicast switching, video wall configuration, and matrix management — all through an intuitive WebGUI accessible from any browser or directly via HDMI display and USB keyboard. Define zones, build presets, and switch routes across multiple video environments with a few clicks, eliminating the need to configure each extender individually. Real-time visibility into every connected unit — IP addresses, netmask, and status — keeps operators fully informed at all times. A built-in trigger input interface allows customized keypads or remote control devices to be mounted in podiums, conference tables, or classrooms, putting preset recall at users’ fingertips. Full control is available via WebGUI, RS-232, Telnet, IR remote, and trigger inputs — because in mission-critical environments, control has to be total.
| Item | Specification / Details |
|---|---|
| Interfaces | |
| Output Port | 1 HDMI (Type-A) |
| Control I/O | 1 IR Extender (3.5mm) 1 RS-232 (3-pin Terminal Block) 8 Trigger (10-pin Terminal Block) 1 USB (Type-A) 2 LAN (RJ-45) |
| Reserved Port | 1 RS-232 (5-pin Terminal Block) |
| Video | |
| HDMI Compliance | 1.4 |
| Output Signal Type | 1920x1080p@60 |
| Resolutions | |
| Maximum Output HDMI | 1920×1080p@60 |
| Power | |
| Power Supply | 5V/2.6A DC (Locking) |
| Power Consumption | 2.99W |
| Enclosure | |
| Chassis Material | Metal (Steel) |
| Chassis Color | Black |
| Dimensions (W×H×D) | 231.5mm×25mm×108mm [Case Only] 231.5mm×25mm×117mm [All Inclusive] |
| Weight | 648g |
| Field Firmware Update | USB Flash Drive, WebGUI |
