FO-HDM-IP4K-SET, HDMI extender set is designed to provide a long haul video signal transmission over fiber optic cable at furthest possible distances. Avenview’s FO-HDM-IP4K-SET delivers an amazing pixel to pixel transmission of 4K or 1080p HDMI signal up to 20 kilometers. With this extender users overcome the length restrictions of standard HDMI cables with IR Support. Features | • The Sender and Receiver units can extend 20000 meters (20 km) over a Fiber Optic cord point to point;
• The Sender can be connected to a Gigabit switch to establish an Ip address therefore sending 1080p/4K video signals to multiple
Receivers connected to the Gigabit switch and the HDMI displays. (network switch with fiber optic ports required);
• Multiple Senders can be connected to a Managed Gigabit switch with vlAN/IGMp support therefore sending 1080p/4K video
signals to Receivers connected to the Gigabit switch to show different sources on multiple displays;*
• Extends HDMI signal up to 20 km over fiber optic;
• HDCP Compliant;
• Supported resolutions: 480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz, 1080i@50/60Hz,1080p@50/60Hz 4Kx2K@25/30Hz,4Kx2K@25/30Hz
• Supports point to point transmission function which can be expanded to the multi-point to point transmission function.
• Number of Senders and Receivers that can be used is dependent on bandwidth of the switch (Recommended Gigabit switch 10/1000).Built-in electromagnetic interference prevention in environment for long distance transmission.
• Low signal loss, wide frequency band and strong anti-interference features;
• High-end aluminum alloy enclosure design.
• Wall-mountable design for convenient installation.
• Support IR pass back for easy control.
• Single mode fiber optic transmission.
*Requires a managed Gigabit switch with VLAN/IGMP support to have a soultion with multiple sources (Transmitters). Standard
Gigabit switch can only support one transmitter.
– The managed switch must support port based IEEE 802.1Q VLAN, IGMP, and to allow duplicate IP addresses across the VLAN
domains.
– Each VLAN acts as independent HDMI over IP Channel on the network.
|
Specifications | ITEM | DESCRIPTION | INPUT | FO-HDM-IP4K-S | FO-HDM-IP4K-R | OUTPUT | HDMI TRANSMITTER | HDMI RECEIVER | HDMI COMPLIANCE | Yes | HDCP COMPLIANCE | Yes | TMDS BANDWIDTH | 10.2Gpbs | SUPPORTED RESOLUTION | 480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz,
1080i@50/60Hz,1080p@50/60Hz 4Kx2K@25/30Hz,4Kx2K@25/30Hz | DDC SIGNAL VOLTAGE | 5Vp-p(TTL) | AUDIO SUPPORT | Surround Sound (up to 7.1 Ch) or Stereo Digital Audio | IR PASS-THROUGH | Supportrs 20~60KHz IR devices | CENTRAL WAVELENGTH | 1310nm | INPUT | 1x HDMI | 1x FO, 1x IR IN | OUTPUT | 1x FO, 1x IR Out | 1x HDMI | | RETURN LOSS | 15dB | | RECEIVE SENSITIVITY | ?-32dBm | | OUTPUT LIGHT POWER | ?-11dBm | | LINK LOSS | ?14dB | | FIBER OPTIC CONNECTOR | SC Single Mode | | HDMI CONNECTOR | Type A (19 pin female) | | POWER SUPPLY | 2 x DC 5v/2A | | POWER CONSUMPTION | 4W Max (each) | | DIMENSION L X W X H | 5.9” x 3.7” x0.9” | | WEIGHT | 0.8 lbs | ENVIRONMENTAL | OPERATING TEMPERATURE | 32° ~ 104°F (0° to 40°C) | STORAGE TEMPERATURE | -4° ~ 140°F (-20° ~ 60°C) | RELATIVE HUMIDITY | 20~90% RH (no condensation) |
|
|
Reviews
There are no reviews yet.